|
BROWSE BY PRODUCTS
Controllers
Transmitters
Recorders
pH Electrodes
ORP Electrodes
Chemical Metering
Pumps
Hand-Held meters
pH/ORP
Accessories
Chart Paper
Benchtop Meters
Chlorine Sensors
BROWSE BY MANUFACTURES
Pathfinder
Blue/white
Jenco
Fuji
IQ Scientic Instruments
Signet
Sensorex
Partlow
Pulsafeeder
Newport
Texmate
Rustrack
| |
JENCO 6308DT
D.O. analyzer, 1/4
DIN panel mount IP-65 waterproof case, polarographic sensor with replaceable membranes
and programmable pressure and salinity
compensation. Features 4 fully programmable D.O.
relays and 1 for temperature. Has an RS-485
interface and is password protected. Analog 4-20
mA output is fully programmable and reversible.
Graphical display. Connections are tinned leads.
CE Approved.
|
 Manual |
FEATURES:
Bright, Graphical
LCD Display, 1.5 X 2.25 - Simultaneous
Measurement And Analysis - 1/4 DIN
Watertight, IP65 Rated Enclosure - Reversible &
Isolated 4 To 20mA Output With Adjustable
Bandwidth - Continuous
Controller / Relays Operation During Calibration
- 4-Digit Password
Security Protection - Programmable Set
Point Hysteresis - Automatic
Temperature Compensation - CE Approved
- Built In ISO9001 Certified Facility - Membrane Keypad With Audio
Feedback - Power Down, Non-Volatile Memory Backup
Download
Spec
Sheet
|
| JENCO
6308DT |
Dissolved
Oxygen / Temperature Analyzer |
$569.00 |
|
ELECTRODE / ACCESSORY OPTIONS AVAILABLE |
|
JENCO
ID-900-5DO/10 |
Industrial Inline Epoxy Body D.O. Probe with 3/4 inch MNPT threads front
and rear and a 10 foot long cable |
$295.00 |
| JENCO
ID-900-5-D0/30 |
Industrial
Inline Epoxy Body D.O. Probe with 3/4 inch MNPT threads front and rear and
a 30 foot long cable |
$335.00 |
| JENCO
LD-900-6-0-DO/10 |
Field
Stainless Steel Weighted Industrial D.O. Probe with 3/4 inch MNPT threads
only on the front with a waterproof 10 foot long submersible cable. |
$295.00 |
| JENCO
LD-900-6-O-DO/30 |
Field
Stainless Steel Weighted Industrial D.O. Probe with 3/4 inch MNPT threads
only on the front with a waterproof 10 foot long submersible cable. |
$335.00 |
| JENCO
LD-900-3-DO |
MEMBRANE
KIT: Includes 6 membrane caps, KCL Powder, KC1 Bottle and sandpaper
for cleaning Gold Cathode and Silver anode after soaking then in Ammonia
Hydroxide solution for 2-3 minutes. (Essential kit as electrodes do not
have membranes) |
$
48.00 |
PRIMARY SPECS
| |
Range |
Resolution |
Accuracy |
|
Dissolved Oxygen
(ppm) |
0.0 to 60.00
ppm |
0.01
ppm |
± 0.2% of
span |
|
Dissolved Oxygen (%
) |
0 to
500.0% |
0.1 % |
± 0.2% of
span |
|
Temp. |
-10.0 to 120
°C |
0.1 °C |
±0.1°C ±1
LSD |
DO
|
Salinity
compensation |
Pressure
compensation |
Polarographic
sensor |
Replaceable
membranes |
|
0.0 to 40.0
ppt |
600 to 1100
mBar |
Yes
|
Yes
|
Output Relays
|
Control Type |
Relay Output
(Resistive Load Only) |
Relay Set
Point Hysteresis |
|
On/Off
|
5 Amps at 115
VAC 2.5 Amps at 230 VAC |
User
Programmable |
Current Output
|
Type |
Range |
Accuracy |
Isolated
Voltage |
Maximum
Load |
|
Isolated 4 to
20 mA |
Selectable
Zero, & Span |
±0.02mA
|
1000 VAC
|
500 W
|
General
|
ATC
Sensor |
Thermistor
10KiloOhms at 25 °C |
|
Security
Protection |
4 digit
password |
|
Keypad |
Audio
feedbackup |
|
Communication |
RS-485 |
|
Pre-Amplifier
Voltage |
±5 VDC,20mA
Max Output |
|
Power
source |
115/230 VAC
,50/60Hz |
|
Dimensions |
1/4 DIN
,Depth 155mm |
|
Weight |
950 gm
|
|
HOW TO ORDER