|
BROWSE BY PRODUCTS
Controllers
Transmitters
Recorders
pH Electrodes
ORP Electrodes
Chemical Metering
Pumps
Hand-Held meters
pH/ORP
Accessories
Chart Paper
Benchtop Meters
Chlorine Sensors
BROWSE BY MANUFACTURES
Pathfinder
Blue/white
Jenco
Fuji
IQ Scientic Instruments
Signet
Sensorex
Partlow
Pulsafeeder
Newport
Texmate
Rustrack
| |
JENCO /
CONTROLLER - 6309PDT
THERMISTOR-A
temperature-sensitive passive semiconductor which exhibits a large change in
electrical resistance when subjected to a small change in temperature; usually
with a negative temperature coefficient.
|
 Download
Spec Sheet
Manual
|
FEATURES
Bright, Graphical LCD Display, 1.5 X 2.25
- Simultaneous Measurement And Analysis
- 1/4 DIN Watertight, IP65 Rated Enclosure
- Reversible & Isolated 4 To 20mA Output
With Adjustable Bandwidth - Continuous Controller / Relays Operation
During Calibration - 4-Digit Password Security Protection
- Programmable Set Point Hysteresis - Automatic Temperature Compensation
- CE Approved - Built In ISO9001 Certified Facility
- Membrane Keypad With Audio Feedback - Power Down, Non-Volatile Memory Backup
- RS-485 Output
- Multiple Spst On/Off Relays - Embedded Self
Diagnostic Program - High 50/60 Hz Noise
Rejection
1/4 DIN panel mount pH single parameter
analyzer with electrode efficiency display
function. Features pH linear or antilog
transmitter output, hysteresis control and
uninterrupted operation during pH calibration.
Has one 4-20mA output, 5 relays and a RS-485
communications interface. Graphical display.
115/230V AC. CE Approved. |
|
ELECTRODE / ACCESSORIES OPTIONS AVAILABLE |
|
PART# |
DESCRIPTION |
PRICE |
|
JENCO 6309-PDT |
1/4
DIN panel mount pH single parameter analyzer -
Meter comes w/ a 10K Ohm resistor to simulate
25°C or 77°F |
$649.00 |
|
JENCO
1922757-020HT |
A flat Tip industrial in-line pH/Reference
double junction electrode Spade Lug for pH (+)
and stripped and Tinned Lead for pH Reference.
Comes w/20ft. cable.
Range 0 pH to 12 pH |
$136.00 |
|
JENCO
1923737-020HT |
A Spherical Bulb with protective guard
industrial in-line pH/Reference double
junction electrode spade Lug for pH (+) and
Striped and Tinned Lead for pH Reference.
Comes w/20ft cable. Range 0 pH to 12
pH |
$136.00 |
|
JENCO-600B-Y |
An adapter
to use a BNC connection- 4mm Spade Lug for pH(+) |
$
48.00 |
|
ELECTRODE OPTION |
|
SENSOREX S650CD |
pH ELECTRODE -
Cartridge Style, Flat Surface,
self cleaning |
$121.00 |
|
SENSOREX S653/10 |
10 Foot Cable Assembly Standard Use, without ATC. |
$ 49.00 |
|
DISSOLVED OXYGEN PROBES ( All require ordering
accessory membrane Kit LD-900-3-DO) |
|
JENCO
ID-900-5-D0/10 |
Industrial Inline Epoxy Body D.O. Probe with
3/4 inch MNPT threads front and rear and a 10
foot long cable. |
$295.00 |
|
JENCO
ID-900-5-DO/30 |
Industrial Inline Epoxy Body D.O. Probe with
3/4 inch MNPT threads front and rear and a 30
foot long cable. |
$335.00 |
|
JENCO
LD-900-6-DO/10 |
Field Stainless Steel Weighted Industrial D.O.
Probe with 3/4 inch MNPT threads only on the
front with a waterproof 10 foot long
submersible cable. |
$295.00 |
|
JENCO
LD-900-6-DO/30 |
Field Stainless Steel Weighted Industrial D.O.
Probe with 3/4 inch MNPT threads only on the
front with a waterproof 30 foot long
submersible cable.(SPECIAL ORDER 8 -WEEKS)
|
$335.00 |
|
JENCO
LD-900-3-DO |
MEMBRANE KIT: Include 6 membrane caps,
KCL Powder, KC1 Bottle and Sandpaper for
cleaning Gold Cathode and Silver anode after
soaking then in Ammonia solution. (THIS IS
AN ESSENTIAL KIT AS ELECTRODES DOE NOT HAVE
MEMEBRANES) |
$ 48.00 |
SPECIFICATIONS
PRIMARY SPECS
| |
Range |
Resolution |
Accuracy |
|
pH |
-2.00 to 16.00 |
0.01 pH |
0.1% ± 1 lSD |
|
Temp. |
-10.0 to 120 °C |
0.1 °C |
±0.3 °C |
PH
|
Temperature Compensation Range |
-10.0 to 120.0 °C
|
|
Buffer Recognition |
4.01, 7.00, 10.01 / 4.00, 6.86, 9.18
|
|
Buffer Temperature Range |
0 to 60.0 °C
|
|
Electrode Slope Compensation |
±30% of Ideal Slope
|
|
Electrode Offset Compensation |
±100 mV
|
|
Input Impedance |
Greater than 10 exp(13) Ohms
|
|
Calibration Auto End Point
Sensing |
Yes
|
OUTLET RELAYS
|
pH |
Temperature |
Control Type |
Relay Output (Resistive Load
Only) |
Relay Set Point Hysteresis |
|
2 programmable high or 2 low |
1 programmable high or 1 low
|
5 Amps at 115 VAC 2.5 Amps at 230
VAC |
On/Off
|
User Programmable
|
CURRENT OUTPUT
|
Type |
Range |
Accuracy |
Isolated Voltage |
Maximum Load |
|
solated 4 to 20 mA
|
Selectable Zero, & Span |
±0.02mA
|
500 VDC
|
500 W
|
GENERAL
|
ATC
Sensor |
Thermistor 10 Kilo Ohms at 25 C
|
|
Security Protection |
4 digit password
|
|
Keypad |
Audio feedbackup
|
|
Communication |
RS-485
|
|
Pre-Amplifier Voltage |
±5 VDC,20mA Max Output
|
|
Power source |
115/230 VAC ,50/60Hz
|
|
Power source |
1/4 DIN ,Depth 148mm
|
|
Weight |
950 gm
|
|
