|
BROWSE BY PRODUCTS
Controllers
Transmitters
Recorders
pH Electrodes
ORP Electrodes
Chemical Metering
Pumps
Hand-Held meters
pH/ORP
Accessories
Chart Paper
Benchtop Meters
Chlorine Sensors
BROWSE BY MANUFACTURES
Pathfinder
Blue/white
Jenco
Fuji
IQ Scientic Instruments
Signet
Sensorex
Partlow
Pulsafeeder
Newport
Texmate
Rustrack
| |
JENCO / CONTROLLER
-
6309POT
pH & ORP analyzer,1/4 DIN panel mount
IP-65 case. Features 2 pH and 2 ORP fully
programmable relays and one for temperature.
RS-485 interface, password protected with
individual ID's. 4-20 mA analog output is fully
programmable, assignable & reversible.
Graphical display. Tinned lead connectors. CE
Approved.
features
|
For .any pH
electrode or a pH electrode with a 10K Thermistor ATC. Wire connections
must be striped and tinned leads. A pH(+) may also be used as a spade Lug
4mm and all other leads are stripped and tinned. For a BNC connection the 600B-Y
adapter is available. The 600B-Y has a 4mm Spade Lug for pH(+) and all other
leads on the analyzer side are stripped and tinned. The electrode side is a BNR
to fit the BNC of any electrode. The meter comes with a 10K Ohm resistor
to simulate 25° C or 77° F
$719.00
|
FEATURES
pH/Orp/Temp. Measurement & Control
- Display pH Electrode Efficiency - Reversible & Isolated 4~20mA Output
- RS-485 Output - Bumpless Calibration - Graphic LCD Dispaly,128 X 64With Backlight
- Membrane Switch With Audio Feedback
- Auto Temp. Compensation
- High 50/60 Hz Noise Rejection
- Pipe/Wall/Panel Mounting - 1/4 DIN Watertight Enclosure
- One Programmable Relay For Temp. - Programmable Linear/ Orp
Current Output Or Programmable Linear/ Anti-Logarithmic Current Output.
 Download
Spec Sheet
Manual
|
|
ELECTRODE / ACCESSORIES OPTIONS AVAILABLE |
|
JENCO
1922757-020HTV18 |
A Flat Tip
Industrial in-line pH/Reference double junction electrode with 10K
Thermistor ATC and Spade Lug for pH (+) and Stripped and Tinned Leads for
all other connections. Includes a 20 foot long cable. Range 0 pH to 12
pH |
$179.00 |
|
JENCO
1923737-020HTV18 |
A Spherical
Bulb with protective guard industrial in-line pH/Reference double junction
electrode with 10K Thermistor ATC and Spade Lug for pH (+) and Stripped
and Tinned Leads for other connections. Includes a 20 foot cable.
Range o pH to 12 pH |
$179.00 |
|
JENCO-600B-Y |
An adapter
to use a BNC connection- 4mm Spade Lug for pH(+) |
$
48.00 |
|
SENSOREX-S650CD
-SUBMERSION
OR
S660CD - INLINE |
pH ELECTRODE -
Cartridge Style, Flat Surface,
self cleaning |
$121.00 |
|
SENSOREX-S653/10 |
10 Foot Cable Assembly Standard Use, without ATC. |
$ 49.00 |
|
ORP ELECTRODES |
|
JENCO
1929857-020T |
A flat Tip
Industrial in-line ORP/Reference double junction electrode with
all Stripped and Tined Leads for all connections. Includes a 20
foot cable. |
$147.00 |
|
JENCO
1929837-020T |
A Spherical Bulb
with protective guard industrial in-line ORP/Reference double
junction electrode with all Stripped and Tinned Leads for all
other connections. Includes a 20 foot cable. |
$153.00 |
|
SENSOREX-S650CD-ORP-SUBMERSION
OR
S660CD/ORP- INLINE |
ORP ELECTRODE -
Cartridge Style, Flat Surface,
self cleaning |
$144.00 |
|
SENSOREX-S653/10 |
CAP AND
10 FOOT Cable Assembly Standard Use |
$ 45.00 |
PRIMARY SPECS
| |
Range |
Resolution |
Accuracy |
|
pH |
-2.00 to 16.00 |
0.01pH |
0.1% ± 1 LSD |
|
ORP(Absolute) |
-2500~2500mV |
1mV |
±0.1% rdg ± 1mV |
|
ORP(Relative) |
-6499~6499mV |
1mV |
±0.1% rdg ± 1mV |
|
Temp. |
-10.0 to 120 °C |
0.1°C |
± 0.3°C |
PH
|
Temperature Compensation Range |
-10.0 to 120.0 °C
|
|
Buffer Recognition |
4.01, 7.00, 10.01 / 4.00, 6.86, 9.18
|
|
Buffer Temperature Range |
0 to 60.0 °C
|
|
Electrode Slope Compensation |
±30% of Ideal Slope
|
|
Electrode Offset Compensation |
±100 mV
|
|
Input Impedance |
Greater than 10 exp(13) Ohms
|
|
Calibration Auto End Point
Sensing |
Yes |
OUTPUT RELAYS
|
pH |
2 programmable high or 2 low |
|
ORP |
2 programmable high or 2 low |
|
Temperature |
1 programmable high or 1 low
|
|
Control Type |
On/Off
|
|
Relay Output (Resistive Load
Only) |
5 Amps at 115 VAC 2.5 Amps at 230
VAC |
|
Relay Set Point Hysteresis |
User Programmable |
CURRENT OUTPUT
|
Type |
Range |
Accuracy |
Isolated Voltage |
Maximum Load |
|
Isolated 4 to 20 mA
|
Selectable Zero, & Span
|
±0.02mA
|
500 VDC
|
500 W
|
GENERAL
|
ATC Sensor |
Thermistor 10KiloOhms at 25 C
|
|
Security Protection |
4 digit password
|
|
Keypad |
Audio feedbackup
|
|
Communication |
RS-485
|
|
Pre-Amplifier Voltage |
±5 VDC,20mA Max Output
|
|
Power source |
115/230 VAC ,50/60Hz
|
|
Dimensions |
1/4 DIN ,Depth 148mm
|
|
Weight |
950 gm |
|
