|
BROWSE BY PRODUCTS
Controllers
Transmitters
Recorders
pH Electrodes
ORP Electrodes
Chemical Metering
Pumps
Hand-Held meters
pH/ORP
Accessories
Chart Paper
Benchtop Meters
Chlorine Sensors
BROWSE BY MANUFACTURES
Pathfinder
Blue/white
Jenco
Fuji
IQ Scientic Instruments
Signet
Sensorex
Partlow
Pulsafeeder
Newport
Texmate
Rustrack
| |
Chem-Pro™ C3 Diaphragm Metering
Pump | |
C3
Series |
-
Maximum
Feed rates:
-
42 GPH at 0 PSI
-
160 LPH at 0 Bar
-
Output pressures up to 175 PSI (12
bar)
-
Variable Speed Drive
-
Washdown (NEMA 4X, IP66)
-
Turndown Ratio 100:1
-
Accuracy +/- 2% full scale
-
Output adjustment 1% to 100%
| |
 | |
|
|
Shown with optional extended
brackets (item #
72000-380) |
C3
Series Product
Information |
|
| | |
|
|
|
|
Series |
Junction Box |
DFD
(leak
detection) |
Input |
Output |
FVS
(Flow Verification) |
4-20 mA |
0-10 VDC |
Pulsed |
Alarm
Relay
(3
Amp) |
| C3F |
Optional |
Yes |
Yes |
No |
No |
No |
Yes |
| C3V |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes | |
|
|
|
-
Priming
/ pressure relief valve (located on the pump head)
-
Pump
head adapters:
-
Inlet
(suction side), Barbed for 1/2" tubing
-
Outlet
(discharge side), select one of the following
-
Foot
valve / Strainer with 1/2" barbed tubing adapter
-
Injection fitting with one of the following
adapters:
-
Barbed, 1/2" tubing
-
Threaded, 1/2" male NPT
-
Suction
tubing, 8 feet (2.4 meters) of 1/2" clear PVC tubing
-
Mounting
brackets (2) with screws (extended brackets Sold
Separately) |
|
|
|
|
Blue-White's
Stainless Steel extended brackets allow the pump to be
securely mounted to most surface; floor, shelf, or skid.
The brackets lift the pump up 4-1/2 inches (114.3 mm),
allowing you to easily connect the suction side of the
pump to your solution. |
-
Raise the
metering pump 4-1/2 inches (114.3 mm) off the ground
or a surface
-
Made out
of tough Stainless Steel
-
Provides a
stable mounting surface
|
|
Item
Number |
Description |
|
72000-380 |
Extended Mounting Brackets, 1 Pair, SS, 4
SS
screws | | |
 | |
|
|
Caution: Always wear protective
clothing, face shield, safety glasses and gloves when working
on or near your metering pump.
Additional precautions
should be taken depending on the solution being pumped. Refer
to MSDS precautions from your solution
supplier. |
|
Note: All diagrams are strictly for
guideline purposes only. Always consult an expert before
installing the metering pump on
specialized systems. The metering pump
should be serviced by qualified persons
only. | |
|
