PULSAtron Series E+

The PULSAtron Series E Plus pump features an automatic control available with 4-20 mA DC direct or external pacing, with stop function. It also offers manual control by on-line adjustable stroke rate and stroke length.

Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset.

Nineteen distinct models are available, having pressure capabilities to 300 PSIG @ 3 GPD, and flow capacities to 504 GPD @ 20 PSIG, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 2% of maximum capacity.

As with Series E, our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

A variety of chemicals can be pumped by Series E Plus such as glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, Hypalon®, Viton®, ceramic, alloys and 316SS.

Complete Economical Selection

Nineteen distinct models are available, having pressure capabilities to 300 PSIG @ 3 GPD, and flow capacities to

504 GPD @ 20PSIG, with a turndown ratio of 100:1. Metering performance is reproducible to within ± 2% of maximum

capacity. Please refer to the reverse side for Series E PLUS specifications.

OPERATING BENEFITS

Reliable metering performance. Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other

electrical disturbances.

Rated “hot” for continuous duty. Series E PLUS pumps continue to meet their specifications for pressure and

capacity even during extended use. That’s because of our high quality solenoid and special enclosure that

effectively dissipates heat

High viscosity capability. A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 3000 CPS. For higher vicosity applications, larger, spring-loaded connections are available

Leak-free, sealless, liquid end. Our diaphragms are of superior construction—PTFE-faced, bonded to a composite

of Hypalon and fabric layers, and reinforced with a metal insert for optimum flexibility and durability.

System Compatibility

A wide variety of chemicals can be pumped.

Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene

Fluoride (PVDF), PTFE, Hypalon, Viton, ceramic, alloys and 316SS.

Immediate installation and start-up.

Included as standard accessories with all models are an injection/back pressure valve assembly and a foot valve/

strainer assembly*, including discharge and suction tubing (*not avail. with high viscosity connections for >3000 CPS).

Safe and easy priming and valve maintenance.

Included as a standard accessory is a bleed valve assembly, including return tubing (available

only on those models with tubing connections and < 240 GPD).

Quick and economical liquid end

maintenance.

Available for every model is a unique KOPkit®, a convenient, economically

priced, package containing new cartridge check valves and other important spare parts.

For additional information about PULSAtron’s full-featured Series MP refer to Technical Sheet

No. EMP-027, about the mid-range Series E, Series D & Series A PLUS refer to Technical Sheet

No. EMP-022, EMP-023 & EMP-025. For information about the economical Series C PLUS &

Series C, refer to Technical Sheet No. EMP-026 & EMP-024.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

2075 CORTE DEL NOGAL, SUITE X

CARLSBAD, CA 92011

email: info@phorp.com