The Texmate sterilizer controller has many new and unique features making it ideal for steam sterilizer / autoclave manufacturers and refurbishers to upgrade analog sterilizers to digital control. The controller contains all the built-in temperature control and timer functions for steam sterilizer operations in easy to program menus described below.

The dual alphanumeric display with a five-button IP65 polyester faceplate, fronting a 96x48mm 1/8 DIN case, is the ideal operator interface for easy programming and displaying sterilizer menu messages.

Bubbler System Level Measurement

� Easy front panel configuration and control using instructive programming menu messages.
� Selectable "STERILIZE ONLY" or "STERILIZE AND DRY" cycles.
� Descriptive display messages showing temperature and time remaining during each cycle.
� Operator adjustable drying time for drying cycle with factory programmable minimum and maximum time limits.
� Operator selectable sterilization temperatures with factory programmable preset temperature limits.
� Operator adjustable sterilization time window for selected sterilization temperature. Factory programmable minimum and maximum sterilization time limits.
� Over / under-temperature shutdown with scrolling display fault indication: "OVER TEMPERATURE FAILURE" or "UNDER TEMPERATURE FAILURE".

� Over-temperature shutdown during drying cycle.
� Temperature warning scrolling display message: "WARNING CONTENTS ARE HOT" if the door is opened and the temperature is above the factory programmed value.
� Factory programmable independent PID control settings for both the sterilizing and drying cycles.
� RTD or thermocouple and status inputs.
� Relay outputs for heater / vent valve control.
� Optional direct serial printer output with optional print format including: date, job number for day, time related temperature and time for duration of sterilize
cycle, and temperature fault indication on printout.
� Trend analysis using optional 4000 sample time stamped data logger.
� For multiple unit OEM manufacturers and refurbishers, the operating system is reconfigurable using Texmate's Development System software.

Texmate Controllers for this application:
DI-602AT5C�DR�PSI�....... Dual display with Steam sterilizer macro from US$ 510.00
DI-60AT5C-DR-PS1-....... Single display with Setam sterilizer macro from US$ 435.00

2075 CORTE DEL NOGAL, SUITE X

CARLSBAD, CA 92011

email: info@phorp.com